AF-02EXXLP Accent Fill

2" Coaxial Wideband Driver: 500Hz-28,000Hz

AF-02EXXLP Accent Fill


AF-02EXXLP Accent Fill

CDT Audio introduces this 2" coaxial audiophile grade wideband marvel which puts sweet midrange with incredible detail in your vehicle locations simply and easily. Suitable for enclosed or free air use in your vehicle, these wideband drivers provide full and rich extended midrange down to 500Hz up to a 28,000Hz and beyond tweeter top end frequency.

If your listening taste is for superior midrange for vocal and snappy mid-bass detail with an amazing smooth upper tweeter

AF-02EXXLP Accent Fill
AF-02EXXLP Accent Fill

sound, wideband drivers provide optimum extended range and wider frequency.
This wideband driver delivers an open lifelike sound performance. You get both mid- and tweeter in an all-in-one driver with more and wider dispersion at the highest frequencies than any other traditional 25mm dome tweeter.

Tech Specs
  • 1 pair 2"coaxial  wideband mid/tweeter drivers
  • Woofer diameter: 2" (52mm)
  • Tweeter ¾”
  • Frequency response: 500Hz-28,000Hz
  • 1 e/a stereo (left/right) level control unit
  • Sensitivity: 84dB
  • Power handling w/HP xover: 100-150 watts @ 500Hz
  • Magnet: Neodymium
  • Voice coil: 1" (25mm)
  • Surround: Rubber
  • Frame: Injection molded
  • Woofer cone: carbon  reinforced 
  • Impedance: 4 ohms
  • Woofer surround: rubber
  • Mounting bezel OD diameter: 2 7/8"
  • Mounting hole: 2 7/16"
  • Mounting depth: 1.3" (34mm)
Price (incl. warranty)
Quantity:


Promo Price: $149.99

Reg. $150

Using CDT Audio wideband mid-tweeter drivers as an accent fill add-on system, here is what you can expect:

  • The soundstage moves upwards and outward 
  • Your bass response moves away from the rear of the car to the front 
  • Your bass impact and transient response improve 
  • Vocals open up and sound more natural and lifelike 
  • Imaging of solo voices and instruments is more centered, clear and detailed
Model: AF-02EXXLP 2” Coaxial Wideband
  • No additional amplifiers or crossovers are required. Everything is supplied in the kit.
  • Nothing existing needs to be removed – all components are additional. However, if upgrading to CDT Audio components feel free to replace any existing components.
  • One good amplifier with 2Ohm-4Ohm capability will handle the accent systems as well as the main system. The subwoofer is virtually always separately amplified to set up the major sensitivity differences involved at the high power levels associated with bass.


 << Back to Back to Accent Fills Page